The "CH-14 AXIe-1" provides 13 instrument modules slots computable with AXIe 0 and 1 specifications. For each slot, the "CH-14 AXIe-1" supplies 385 Watts of power, provides PCIe interface Gen3 x4, distributed gigabit Ethernet LAN, provides support for all AXIe-1 features of inter-module synchronization including 62-bit local bus lines between adjacent modules.
The "SM AXIe-1" module is a system module in the AXIe-1 standard that provides communication of each AXIe-1 instrument with an external controller simultaneously via primary (Ethernet 100/1000 Base-T) and instrumental (PCIe GEN3 х4) interfaces. The "SM AXIe-1" provides support for all AXIe-1 features of inter-module synchronization.
A PXI modules carrier "NMAXIe-1" is a Gen3 x4 module specially developed to support the use of PXIe standard modules in AXIe systems, which allows for full use of the best qualities of both standards in a single system. The PXI modules carrier "NMAXIe-1" is a single-slot module in the AXIe-1 standard that can simultaneously carry two single-slot modules in the PXIe standard.
The PXI modules carrier "NMAXIe-1" doesn't require an installation of any special software, and allows communicating directly with PXIe measurement modules installed on the "NMAXIe-1".
Conduant pioneered peer-to-peer hardware-interlocked data transfers in PCI-based architectures between acquisition and/or playback devices and storage for deterministic, dropout-free recording and playback. FPGA-based, StreamStor products can be modified for function and can support various physical and protocol interfaces Interlaken, Aurora, ODI, SRIO, SFPDP.
The M8121A offers a unique combination of outstanding signal performance, wide bandwidth and unlimited playback time. Through an optical data interface, running at up to 160 Gb/s, the M8121A can receive real or complex samples from compatible storage device, DSP module, digitizer or custom hardware. A digital up-conversion engine is built into the M8121A core ASIC.
The M8132A is a powerful digital signal processing module featuring customer accessible FPGAs, four optical data interfaces (ODI) running at up to 160 Gb/s input and output each. The module provides a trigger input and output, synchronization input and outputs as well as a 10-general purpose I/O pins. The M8132A is part of Keysight’s Wideband Streaming and Signal Processing Products.
The M8131A offers a unique combination of up to 12.5 GHz bandwidth, excellent signal fidelity and gapless capture for an unlimited amount of time. The M8131A can stream raw digitized samples or digitally down-converted I/Q samples over the optical data interface (ODI) at a rate of up to 160 Gb/s. Frequency and phase response is equalized in real-time inside the M8131A’s FPGA.